The BlackVue Power Magic uses advanced power management to ensure your cars battery stays healthy.
The system works by having pre-set cut off voltages to prevent the camera from continuing to operate if the cars/trucks battery drops below a safe level. On 12V vehicles the appropriate cut off voltage is 11.8 Volts.
Features include:
Multi-booting
Prevention to discharge Vehicle Battery
Prevention to Reboot Black box/Navigation
Configuring the Voltage to Cut-off the Power
Configuring the Timer to Cut-off the Power
Timer setting : 6hrs ~ Infinity
Semi-permanent fuse usage
Cigar jack connection socket
For 12-24V
Note: The Power Magic Pro is not a battery. If you would like to run your dash cam for extended periods of time such as 10hrs + it is recommended to use the CELLINK-B battery pack.
Power Magic Pro
Specifications
Rated Output Voltage
12-24V DC
Output current
Rated current 1A, max 2A
Output voltage cut-off
11.6~11.8V (±0.05V)
22.8~23.2V (±0.1V)
on the basis of the input
Output voltage restoration
11.7~11.9V (±0.05V)
22.9~23.3V (±0.1V)
on the basis of the input
This is the perfect companion to the camera's. The camera's don't draw much power when the car is not running, but its always good to have peace of mind that if the battery voltage does get too low, power magic will kick out allowing you to at least start your car! I highly recommend getting power magic alongside any cameras you may get
Forgotten your password
If your email address is valid you will shortly receive an email to enable you to reset your password.
If you don't receive the email within 5 minutes please check your spam folder.
Create an account
An activation email has been sent to the email address that you provided, please follow the instructions in it to finish registration and activate your account.